(on base only) to advance through
multiple messages.
Playback will begin at the start of
the message you chose and include
the message number.
E
M
RASING
ESSAGES
:
TO ERASE A SINGLE MESSAGE
During playback, press ERASE.
The unit will prompt you with
“ erase message --” followed by the
message number.
To cancel the erasure, press STOP
within 4 seconds and the unit will
announce “ message saved .”
Otherwise, the unit will announce
“ message erased ” and then resume
playback of the next message.
:
TO ERASE OLD MESSAGES
While the unit is in standby mode,
hold ERASE.
If you only have new messages, the
unit will remind you with “ new
messages only .”
If old messages do exist, the unit
will prompt you with “ erase old
messages. ”
To cancel the erasure, press STOP
within 4 seconds and the unit will
announce “ old messages saved ”.
Otherwise, the unit will announce
“ old messages erased ”.