Figure 90. Identify Device Information. (Part 5 Of 7) - Hitachi IC25N040ATCS04-0 - Travelstar 40GN 40GB UDMA/100 4200RPM 2MB 2.5" IDE Hard Drive Specifications

Word Content
86 0XXXH
87 4003H
88 XX3FH
89 XXXXH
90 0000H
91 40FEH
92 XXXXH
** indicates a feature that is able to be unsupported by the Device
Configuration Overlay command.

Figure 90. Identify device information. (Part 5 of 7)

Description
Command set/feature enabled
*
15-12(=0) Reserved
11(=1) 1=Device Configuration Overlay supported
*
10- 9(=0) Reserved
8(=X) 1=SET MAX security extension enabled
*
7(=X) 1=Address Offset mode enabled
6(=0) 1=SET FEATURES subcommand required to spin-up
5(=0) 1=Power-Up In Standby feature set has been
enabled via the SET FEATURES command
4(=0) 1=Removable Media Status Notification Feature
Set enabled
3(=X) 1=Advanced Power management Feature Set
enabled
2(=0) 1=CFA Feature Set supported
1(=0) 1=READ/WRITE DMA QUEUED command supported
0(=0) 1=DOWNLOAD MICROCODE command supported
Command set/feature enabled
15(=0) Always
14(=1) Always
13- 2(=0) Reserved
1(=1) 1=SMART self-test supported
0(=1) 1=SMART error logging supported
Ultra DMA Transfer mode (mode 5 supported)
15-14(=0) Reserved
13(=X) 1=UltraDMA mode 5 is selected
12(=X) 1=UltraDMA mode 4 is selected
11(=X) 1=UltraDMA mode 3 is selected
10(=X) 1=UltraDMA mode 2 is selected
9(=X) 1=UltraDMA mode 1 is selected
8(=X) 1=UltraDMA mode 0 is selected
7- 6(=0) Reserved
**5(=1) 1=UltraDMA mode 5 is selected
**4(=1) 1=UltraDMA mode 4 is supported
**3(=1) 1=UltraDMA mode 3 is supported
**2(=1) 1=UltraDMA mode 2 is supported
**1(=1) 1=UltraDMA mode 1 is supported
0(=1) 1=UltraDMA mode 0 is supported
Time required for security erase unit completion
Time= value (XXXXh)*2 [minutes]
Time required for Enhance security erase completion
0000 : Not supported
Reserved
Current Master Password Revision Codes
Hitachi Travelstar 60GH & 40GN hard disk drive specifications
127