Table 135 Security Set Password Command (F1H); Security Set Password (F1H) - Hitachi HDS721050CLA362 Specifications

11.34 Security Set Password (F1h)

Command Block Output Registers
Register
Data
Feature
Sector Count
Sector Number
Cylinder Low
Cylinder High
Device/Head
Command
Error Register
7 6 5
CRC UNC 0
0 0 0
Table 134 Security Set Password Command (F1h)
The Security Set Password command enables security mode feature (device lock function), and sets the master
password or the user password.
The security mode feature (device lock function) is enabled by this command, and the device is not locked
immediately. The device is locked after next power on reset. When the MASTER password is set by this
command, the master password is registered internally, but the device is NOT locked after next power on reset
or hard reset.
This command requests a transfer of a single sector of data from the host including the information specified in
Table 134
on the page 185.
The data transferred controls the function of this command.
HITACHI Deskstar & CinemaStar 7K1000.B & Deskstar E7K1000 Hard Disk Drive specification
7 6 5 4 3 2 1
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
1 - 1 D - - -
1 1 1 1 0 0 0
4 3 2 1
IDN 0 ABT T0N AMN
0 0 V 0
Command Block Input Registers
0 Register 7
- Data
- Error
- Sector Count
- Sector Number
- Cylinder Low
- Cylinder High
- Device/Head
1 Status
Status Register
0 7 6 5
BSY RDY DF
0 0 V 0
185
6 5 4 3 2 1
- - - - - - -
...See Below...
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
...See Below...
4 3 2 1
DSC DRQ COR IDX ERR
- - 0 -
0
-
-
-
-
-
-
0
V