Bosch SHE7ER55UC Operating Instructions Manual page 13

Manual Rack Height Adjustment (model dependent)
Remove the empty top rack by pulling it out of the dishwasher
until it can be lifted upward as show in Figure 10. Pull the rack
up and out until the rollers are completely free of the roller
guides.
Reinsert the rack with the other set of rollers on the roller guides
as shown in Figure 11.
Cutlery Drawer (model dependent)
The cutlery drawer horizontally positions knives, spatulas and other oversized
tools for improved cleaning and easier loading and unloading. Arrange cutlery in
drawer as illustrated in Figure 12.
When loading large items such as pilsner glasses or 10" plates in the upper rack
(as seen in Figure 13), the drawer can be removed to allow more room.
To remove:
• Pull empty drawer out of dishwasher until it stops rolling.
• While pulling toward you, lift the front of the drawer upward and outward (see
Figure 14) until the rollers are completely free of the roller guides.
• Place empty drawer in safe place.
To reinstall:
• Pull the roller guides on both sides out of the dishwasher.
• Position drawer hooks on top of the roller guides (see Figure 15).
• While holding one roller guide, slide drawer's top wheel over the roller guide
stop (see Figure 16).
• Repeat on other side.
• Slide drawer back into dishwasher.
Figure 10 Figure 11
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16
11