Description; Unpacking; Parts List; Parts Included With The Product - Bosch EX36 Instruction Manual

8 en | Description
2

Description

The EX36(N) Night Vision Camera has been designed with tilt
on its faceplate to allow corner mounting and t provide better
angle views in small rooms. The housing and faceplate consist
of tough materials to withstand damage in hostile environments
such as prison cells and psychiatric wards.
The smooth compact housing allows for tight installations
without exposed wiring or mounting screws, while separate
windows for the camera lens and LEDs result in a perfect
picture without light rebound.
A photocell circuit is used to provide automatic on/off infrared
operation.
The voltage regulator circuit allows for 12 VDC or 24 VAC
operation, and a range in between. This regulator also provides
protection from voltage surges, transient spikes, and reverse
voltage.
2.1

Unpacking

This electronic equipment should be unpacked and handled
with care. Check the parts list below and confirm that all items
are included. Inspect the equipment thoroughly to ensure that
nothing was damaged in transit.
Contact a Bosch Service Center if a problem is noted. Please
refer to Section 1.2 Bosch Contact Information, page 7 for
contact information in your area.
2.2

Parts List

2.2.1

Parts Included with the Product

The following items are supplied with the unit:
–
–
–
F.01U.172.707 | 3.0 | 2011.02
EX36(N) camera assembly
installation instruction booklet
Plastic bag containing one hex key for removal of faceplate
mounting screws
Instruction Manual
Corner-mount No-grip Camera
Bosch Security Systems, Inc.