Bosch EX36 Instruction Manual page 14

14 en | Installation
3.
4.
NOTICE!
If you are installing the camera on drywall, you must use #8
screws and #8 drywall nylon plugs or a superior connection.
5.
F.01U.172.707 | 3.0 | 2011.02
Select a mounting surface capable of supporting the
combined weight of the unit and mounting hardware to
anticipate all expected conditions of both temperature and
vibration.
Secure all cabling.
Drill holes into the mounting surface. Depending on the
type of mounting surface (brick, wood, etc.), you may need
to pre-drill the holes for the mounting screws. Bosch
recommends that you use the housing as a drill template--
refer to Figure 3.5 for the location of the mounting holes in
the housing--to mark the location of the holes, and then
drill the holes. This way no burrs or debris will fall into the
housing.
Figure 3.5 Mounting Holes - EX36(N) Camera Housing
Note: Each arrow points to a mounting hole.
Instruction Manual
Corner-mount No-grip Camera
Bosch Security Systems, Inc.