Removing A Cable From The Card; Figure 13: Connector Orientation - Dell Connectx Mcqh29-Xdr User Manual
Dual port i/o card for dell c6100
Table of Contents
Rev 1.0
5.1.2 Removing a Cable from the Card
1. Pull on the latch release mechanism thereby unlatching the connector and pull the connector
out of the cage.
2. Do not apply torque to the connector when removing it from the card.
3. Remove any cable supports that were used to support the cable's weight.
22
Mellanox Technologies
Figure 13: Connector Orientation
o
1 8 0
Cables and Modules
- Quick Links:
- Ethernet Interface
Hide quick links:
Table of Contents
Need help?
Do you have a question about the ConnectX MCQH29-XDR and is the answer not in the manual?