GE Profile DPGT750 Owner's Manual And Installation Instructions page 23

CONNECTING THE DRYER TO THE
GAS SUPPLY (cont.)
Attach the flexible metal gas line
B
connector to the adapter.
Tighten the flexible gas line connection
C
using two adjustable wrenches.
Installation Instructions
23
CONNECTING THE DRYER TO THE
GAS SUPPLY (cont.)
Install a 1/8" NPT plugged tapping to the
D
dryer gas line shut-off valve for checking
gas inlet pressure.
Install a flare union adapter to the plugged
tapping.
NOTE: Apply pipe compound or Teflon
tape to the threads of the adapter and
plugged tapping.
Apply pipe compound or
Teflon ® tape to all male
threads.
Shut-off Valve
Tighten all connections using two
E
adjustable wrenches. Do not overtighten.
Open the gas shutoff valve.
F
®
Plugged
Tapping