Know Your Blender
Parts and Features
Blender Blade (white)
Mill Blade (grey)
Blender Retaining Ring
Mill Retaining Ring
How to Assemble and Use
IMPORTANT: Your blender jar and cutting blades are subject to wear during
normal use. Always inspect jar for nicks, chips, or cracks. Always inspect cutting
blades for broken, cracked, or loose blades. If the jar or cutting blades are damaged,
do not use. Call our toll-free customer assistance number to obtain replacement
parts. Make sure blender is unplugged. Place blender base on clean, dry surface to
keep foreign particles from being pulled up into the motor during operation.
Jar and Mill Assembly
1. Place gasket onto cutting blades
Never place blade assembly on
base unless assembled to jar.
2. Place blades through jar opening.
Keep fingers out of jar while the unit is assembled.
3. Screw retaining ring counter
jar or mill cup.
Make sure the
retaining ring is
Before First Use
After unpacking the blender, wash
everything except the blender base
in hot, soapy water. Dry thoroughly.
Wipe the blender base with a damp
cloth or sponge. DO NOT IMMERSE
THE BASE IN WATER. Care should
be taken when handling the blades
as they are very sharp.