Brother MFC-J6920DW User Manual page 166

Level1 Level2
Network Wired LAN
(Continued) (Continued)
WLAN
See Software and Network User's Guide.
Please go to the Brother Solutions Center to download Wi-Fi Direct™ Guide at http://solutions.brother.com/.
Please go to the Brother Solutions Center to download Web Connect Guide at http://solutions.brother.com/.
The factory settings are shown in Bold with an asterisk.
152
Level3 Level4
TCP/IP IPv6
(Continued)
—
Ethernet
—
Wired Status
—
MAC Address
TCP/IP BOOT Method
IP Address
Subnet Mask
Options Descriptions
Enable or disable
On
the IPv6 protocol.
Off*
If you want to use
the IPv6 protocol,
visit
http://solutions.
brother.com/ for
more information.
Chooses the
Auto*
Ethernet link
100B-FD
mode.
100B-HD
10B-FD
10B-HD
You can see the
Active 100B-FD
current wired
Active 100B-HD
network status.
Active 10B-FD
Active 10B-HD
Inactive
Wired OFF
— You can see your
machine's MAC
address.
Chooses the
Auto*
BOOT method
Static
that best suits
your needs.
RARP
BOOTP
DHCP
[000-255]. Enter the IP
address.
[000-255].
[000-255].
[000-255]
[000-255]. Enter the Subnet
mask.
[000-255].
[000-255].
[000-255]
Page
See .