Compilation And Publication; Choosing A Location - Brother HL-3140CW Safety Manual

Compilation and Publication

Under the supervision of Brother Industries, Ltd., this manual has been compiled and published,
covering the latest product descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without
notice.
Brother reserves the right to make changes without notice in the specifications and materials
contained herein and shall not be responsible for any damages (including consequential) caused
by reliance on the materials presented, including but not limited to typographical and other errors
relating to the publication.

Choosing a location

Put your product on a flat, level, stable surface free from vibration and shocks, such as a desk.
Put the product near a telephone wall jack (MFC only) and a standard grounded AC power outlet.
Choose a location where the temperature remains between 50F and 90.5F (10C and 32.5C)
and the humidity is between 20% to 80% (without condensation).
WARNING
DO NOT expose the product to direct sunlight, excessive heat, open flames, corrosive gasses,
moisture or dust. Doing so may create a risk of an electrical shock, short circuit or fire. It may
also damage the product and/or render it inoperable.
DO NOT place the product near heaters, air conditioners, electrical fans, refrigerators, or water.
Doing so may create the risk of an electrical shock, short circuit or fire, as water may come into
contact with the product (including condensation caused by heating/air conditioning/ventilation
equipment).
2
A
A