GE AJCH 08 ACB, AJCH 10 ACB, AJCH 10 DCB, AJCH 12 DCB, AJCQ 06 LCB, AJCQ 08 ACB, AJCQ 10 ACB, AJCQ 10 DCB, AJCQ 12 DCB, AJCS 06 LCB Owner's Manual page 21

INSTALL WINDOW GASKET AND
8
LOCKING BRACKET
A
Cut the foam top window gasket to the
window width.
B Stuff the foam between the glass and the
window to prevent air and insects from
getting into the room.
9 REPLACE AIR CONDITIONER IN
CASE
Carefully slide the air conditioner back into
A
the case.
Attach the power cord to the base pan with
B
the clamp.
Installation Instructions
Base pan
Power cord
Clamp
21
Attach the window locking bracket with 1 type E
C
screw.
When the wall outlet is to the left, extend the
C
cord under the unit and hold it in place with the
clamp.
Reinstall the locking plate with the tab behind
D
the wall case flange. Tighten the screw.
Locking
plate
Tighten
screw
E Reattach the front grille. An opening for the
power cord is on the bottom of the front grille.
Fill holes and cracks with caulking provided by
F
the installer
.
Power cord
Clamp