Controls; About The Controls On The Air Conditioner - GE 23-11-2129N-002 Owner's Manual And Installation Instructions

About the controls on the air conditioner.

The controls will look like one of the following. (Features and appearance will vary.)
5
4
3
2
1

Controls

Mode Controls
HIGH COOL, MED COOL and LOW COOL provide
cooling with different fan speeds.
HIGH FAN and LOW FAN provide air
circulation and filtering without cooling.
The ENERGY SAVER feature provides for either
HIGH COOL or LOW COOL selection.
The fan will run continuously in the ENERGY
SAVER mode. It will change to a lower RPM
speed when the compressor cycles off. When
the compressor cycles back on, the fan speed
will change back to the higher speed.
NOTE: If you move the mode control from a cool setting
to OFF or to a fan setting, wait at least 3 minutes before
switching back to a cool setting.
Cooling Descriptions
For Normal Cooling —Select HIGH COOL or MED COOL
with the temp control at midpoint.
For Maximum Cooling —Select HIGH COOL with the
temp control at the highest number available on
your knob.
For Quieter & Nighttime Cooling —Select LOW COOL
with the temp control at midpoint.
OFF
HIGH LOW
FAN FAN
HIGH LOW
COOL COOL
HIGH
LOW
COOL
COOL
MODE CONTROLS
Your model will have one of the above controls.
6
7
3
8
2
9
1
10
TEMP CONTROLS
Your model will have one of the above controls.
OFF
LOW
FAN
LOW
COOL
MED
COOL
4 5
6
7
8
Temp Controls
The temp control is used to maintain the
room temperature. The compressor will cycle
on and off to keep the room at the same level
of comfort. When you turn the knob to a
higher number the indoor air will become
cooler. Turn the knob to a lower number and
the indoor room will become warmer.
HI
FAN
HI
COOL
3 4
2 5
1 6
5