Advertisement
care and cleaning
Before cleaning, always switch off,
unplug and let everything cool.
Never put your steamer base in
water or let the cord or plug get wet.
cleaning the water tank
Empty, then rinse out with warm
water and dry.
cleaning the outside
Wipe with a damp cloth, then dry.
all other parts
Wash, then dry.
You can wash the plastic parts
(excluding steamer base) on the top
rack of your dishwasher on a low
heat.
For storage, stack the baskets one
inside the other, starting with the
highest numbered basket and
finishing with basket number 1
Push excess cord into the back of
the steamer.
descaling
Descale after 7-10 uses, depending
on how hard your water is.
Descaling increases steam power
and helps your steamer last longer.
1 Pour clear vinegar into the tank up
to 'Max'. Don't use a descaler.
2 Fit the drip tray, basket and lid.
3 Plug in and set the timer for 20-25
minutes. Unplug if the vinegar
overflows.
4 Unplug and when the steamer is
cool, pour away the vinegar and
rinse out the tank several times with
water. Wash the drip tray, basket
and lid.
service and customer
care
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised Kenwood
repairer.
UK
If you need help with:
using your steamer
servicing or repairs (in or out of
guarantee)
call Kenwood Customer Care on
023 9239 2333. Have your
model number ready - it's on
the underside of your steamer.
Eire
See our advertisement in Golden
Pages.
other countries
.
Contact the shop where you bought
your steamer.
guarantee (UK only)
If your steamer goes wrong within
one year from the date you bought
it, we will repair or replace it free of
charge provided:
you have not misused, neglected or
damaged it;
it has not been modified (unless by
Kenwood);
it is not second-hand;
it has not been used commercially;
you have not fitted a plug incorrectly;
and
you supply your receipt to
show when you bought it.
This guarantee does not affect your
statutory rights.
4
Advertisement
