Kenwood FS370 series Instructions Manual page 7

Hide thumbs Also See for FS370 series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
all other parts
Wash in warm soapy water, then dry.
For storage, stack the baskets one
inside the other, starting with the
highest numbered basket and
finishing with basket number 1
Push excess cord into the back of
the steamer.
descaling
The appliance should be de-scaled
once a month or after every 30 uses
depending upon which comes first.
1 Fill the water tank with 200ml of
household appliance descaler, then
fill the water tank up to the MAX
level with water (approximately
800ml).
2 Fit the drip tray, one basket and the
lid.
3 Plug in the appliance, switch on and
allow the steamer to operate for 5
minutes.
4 Switch off and unplug the appliance
and allow to stand overnight.
5 Empty and discard the descaling
liquid.
6 Rinse out the water tank several
times with fresh warm water.
7 Wash the drip tray, basket and lid in
warm soapy water, then dry.
8 Refill the water tank with fresh water,
refit the parts and allow to run for 5
minutes. Empty and discard any
remaining water.
9 Rinse the water tank several times
with fresh warm water.
10 Wash the drip tray, basket and lid in
warm soapy water.
11 The appliance is now ready for use.
service and customer
care
If the cord is damaged it must, for
safety reasons, be replaced by
.
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
using your steamer
servicing or repairs
Contact the shop where you bought
your steamer.
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents