3. Getting started - Connecting Devices
How does it work?
The Monitor Everywhere Server keeps track of the cameras.
When a user wants to access the camera, the server
authenticates the user and permits the user access to the
Connect the Camera to the power adapter and plug it into
a power socket. Wait until the camera LED changes to fast
blinking, which means that camera is in reset/setup state and
camera is ready for 'Camera Setup' registration. The Camera
must be within range of the Wi-Fi
Status of LED Indication:
- Reset / Setup state: fast blinking
- Unconnect state:
- Connect state:
View your camera from
any device remotely
router with which you want it
3.2 User Account and Camera Setup:
Working with devices for Android
Download and install the application "Monitor Everywhere"
from the Google Play
Store. Note: If you can't find the
application, then use your device browser to go to
www.monitoreverywhere.com for advice on how to install.
Turn on the Wi-Fi
of your device for Android
your wireless network.
Switch on the camera (see 5. Procedure for resetting the
Run the "Monitor Everywhere" application. After initialization,
the Baby Monitor Setup wizard appears.
Select CREATE ACCOUNT.
Select GET STARTED.
Follow the on-screen instructions and select the camera and
connection that your camera can use. If necessary
enter a password.
Tap CONNECT TO Wi-Fi.
Getting started: Working with devices for Android
18/4/13 2:08 PM