Table of Contents
Advertisement
Quick Links
Enclosed please find simple step-by-step instructions to help you quickly assemble your product. Before you begin we
recommend that you follow the steps below:
1. Please read the instructions thoroughly
2. Identify all parts and hardware, and
3. You will need the following tools:
Philips Head screw driver
Flat head screw driver
Hammer
Pliers.
To protect your parts during assembly please place them on a soft surface. To clean surface use only water on a damp cloth.
Do not use window cleaners or cleaning abrasives as it will scratch the surface and could damage the protective coating.
PARTS LIST
REF.
PART NAME
A.
Headboards
B.
Non-grooved Rails
C.
Wide Grooved Rails(Top)
D.
Grooved Rails(Middle/Bottom)
E.
Thick Shelf(Top)
F.
Thin Shelves(Middle/Bottom)
G.
1-3/4 " Bolts
H.
3/4 " Bolts
I.
Nylon Washers
J.
Nuts
K.
Allen Wrench
L.
Wood Dowels
M.
Casters
N.
Restraint Harness
O.
Foam Pad
Model shown is example only.
Styles may vary.
LaJobi Industries. - 257 Prospect Plains Rd. Cranbury,NJ 08512-Phone: 888-266-2848
Bulletin No. A-DT00-00
A S S E M B L Y
Small parts may present a choking hazard prior to assembly.
QUANTITY
2
2
2
4
1
2
16
2
2
2
1
4
4
1
1
I N S T R U C T I O N S
Dressing Table
Adult assembly required.
HARDWARE AND TOOLS DIAGRAM
1-3/4" Bolt
G
I
Nylon Washer
Allen Wrench
K
Casters
M
O
Foam Pad
1
H
3/4" Bolt
Nut
J
Wood Dowel
L
N
Restraint Harness
Advertisement
Table of Contents
Related Manuals for Graco 300-08-35 - Sarah Dressing Table
Summary of Contents for Graco 300-08-35 - Sarah Dressing Table
- Page 1 A S S E M B L Y I N S T R U C T I O N S Dressing Table Adult assembly required. Small parts may present a choking hazard prior to assembly. Enclosed please find simple step-by-step instructions to help you quickly assemble your product. Before you begin we recommend that you follow the steps below: 1.
- Page 2 Furniture Care Instructions Room Climate Control Wood, when first cut contains more than 50 percent water. When it is prepared for furniture construction it is placed in a Kiln and the moisture content is brought down to 8 to 10 percent. Wood is porous and responds to its environment.
- Page 3 STOP IF YOU EXPERIENCE ANY ISSUES WITH THIS PRODUCT BEFORE YOU RETURN THIS TO THE RETAILER PLEASE FOLLOW PROCEDURES ON THE REVERSE SIDE OF THIS FORM. BULLETIN NO. A-PAP00-00...
- Page 4 Product Assistance Procedures You have purchased a quality piece of furniture. Our international team has spent many hours designing and engineering this piece and packaging to ensure you will be satisfied with your purchase. But if for any reason you need help with your purchase please contact us at any time.
- Page 5 A S S E M B L Y I N S T R U C T I O N S ！ WARNING: FALL HAZARD . TO PREVENT DEATH OR SERIOUS INJURY，ALWAYS KEEP CHILD WITHIN ARM’S REACH. . THIS PRODUCT NOT TO BE USED AS A CHANGING TABLE UNLESS EQUIPPED WITH CHANGING PAD AS DESCRIBED BELOW.
- Page 6 A S S E M B L Y I N S T R U C T I O N S (continued) Dressing Table Assembly Step 1 Attach the two non-grooved rails(B) to the top left and right positions on one of the headboards(A) using wood dowels &...
- Page 7 A S S E M B L Y I N S T R U C T I O N S (continued) Step 3 Attach the other headboard(A) to the rails using 1-3/4″ Bolts(G) and Wood Dowels(L). See Figure 3. Figure 3 Model shown is example only.
- Page 8 A S S E M B L Y I N S T R U C T I O N S (continued) Step 5 Place the Restraint Harness(N) and align the hole on the Harness Strap end to the hole on the thick shelf (E).Attach the Strap to the shelf by inserting an Allen Head bolt (H) through a washer (I),the Strap(N) and...