Using the Radio
Turning on the Radio
EN
Press BAND RADIO ON to turn on the radio.
Turning off the unit
Press OFF to turn off the radio.
Adjusting Volume
Press VOL
to decrease volume level.
Press VOL
to increase volume level.
Selecting Radio Band
Press BAND RADIO ON to select between FM and
AM band.
Tuning to a station
Press TRK (SEARCH•TUNE)
radio frequency.
Press TRK (SEARCH•TUNE)
frequency.
NOTE:
NOTE: The display will return to the clock
NOTE:
NOTE:
NOTE:
time after displaying the station fequency
for a few seconds. To view the current
station frequency, press
TRK (SEARCH•TUNE)
Automatic Station Search
Press and hold TRK (SEARCH•TUNE)
for more than 1 second and release to start
automatic station search in the direction selected.
Search will stop once a station is found.
Tip:
Tip:
Tip: Press any key to quite automatic
Tip:
Tip:
station Search.
9
Untitled-1
Radio Frequency Memory
1. Follow steps in "Selecting Radio Band" and
"Tuning to a Station" to tune to the station
you want to store into memory.
2. Press MEMO SET to assign the next available
memory location to the selected station.
P will flash with the next available memory
location light on the display
If you wish to assign another memory location
or overwrite a previously set memory, press
MEMO RECALL repeatedly to select the
memory location.
3. Press MEMO SET again to confirm selection.
Tip:
Tip:
Tip: A Maximum of 10 preset memory
Tip:
Tip:
to tune down
locations are available.
to tune up radio
Memory Recall
Press MEMO RECALL repeatedly to recall preset
stations.
or
.
or
11
2/7/03, 10:08 AM