Anynet+
(HDMi CEC)
This SMART
TV is enabled with Anynet+
(HDMI-CEC),
a feature
that makes it possible
to control
Samsung
external
devices
connected
to the TV with ease. With Anynet+
(HDMI-CEC),
you can use the
TV remote
control
to operate
all compatible
Samsung
devices
that are connected
to the TV. However,
Anynet+
(HDMI-CEC)
only works
with the remote
control
and not with the panel keys.
Use the TV's remote
contro
to operate
third-party
cabe
boxes,
BIu-ray
players,
and home theaters
connected
to the TV, For more
nformat
on, refer to "Universal
Remote
Setup",
o
o
This feature
does not support
other manufacturer's
products.
Anynet+
devices
must be connected
to the TV using an HDMI cable. Some
HDMI cables may not
support
Anynet+
(HDMI-CEC).
In this case, you will
need to replace
the HDMI cable.
The TV remote
control
may not function
under certain
circumstances.
In this case, select the
Anynet+
device again.
Anynet+
(HDMI-CEC)
only works with external
devices that support
Anynet+
(HDMI-CEC)
and
only when those devices
are either
in standby
mode or turned
on.
Anynet+
(HDMI-CEC)
can control
up to 12 compatible
external
devices
(up to 3 of the same type).
With home theater
systems,
however,
the number
of systems
that can be controlled
is limited
to
one.
A home theater
system
that has been connected
to the TV using an HDMI cable and an optical
cable supports
2-channel
audio only. However, the home theater
is capable
of supporting
5.1-channel
audio from digital
broadcasts.
To listen to 5.1-channel
audio from an external
device,
connect
the device to the TV via an HDMI
cable and the device's
digital
audio output
connector
directly
to the home theater
system.