Asus A55BM-PLUS User Manual page 24

Audio 2.1, 4.1, 5.1 or 7.1-channel configuration
Port
Light Blue
(Rear panel)
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
To configure an 8-channel audio output:
7. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are for USB
2.0/1.1 devices.
8. USB 3.0 ports 1 and 2. These two 9-pin Universal Serial Bus (USB) ports are for USB
3.0/2.0 devices.
•
•
•
•
9. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are for USB
2.0/1.1 devices.
10. DVI-D port. This port is for any DVI-D compatible device. DVI-D can't be converted to
output RGB Signal to CRT and isn't compatible with DVI-I.
11. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
12. PS/2 keyboard port. This port is for a PS/2 keyboard.
1-16
Headset
2.1-channel
Line In
Line Out
Mic In
—
Use a chassis with HD audio module in the front panel to support an 8-channel audio
output.
DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows
operating system.
Due to USB 3.0 controller limitations, USB 3.0 devices can only be used under a
Windows OS environment and after installing the USB 3.0 driver.
®
USB 3.0 devices can be used for data storage only.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for a
faster and better performance for your USB 3.0 devices.
4.1-channel 5.1-channel
Rear Speaker Rear Speaker
Out
Front Speaker Front Speaker
Out
Mic In Bass/Center
—
7.1-channel
Rear Speaker Out
Out
Front Speaker
Out Out
Bass/Center
— Side Speaker Out
Chapter 1: Product introduction
®