Sensor Setup - Advantech 530 User Manual

4.11 Sensor Setup

Sensor Record Time:
This controls the recording duration once the sensor is triggered.
Alarm Out Time:
This controls how long (in seconds) the alarm sounds after being trig-
gered.
MOTION SENSITIVE SETUP
Use this menu to adjust the sensitivity of each channel. The first bar
shows the current sensitivity of each channel, use the
lower sensitivity (0 stands for highest sensitivity, 9 is for lowest sensitiv-
ity).
Sensor Trigger Modes:
The unit provides 5 different modes for trigger states:
1. Not installed.
2. Normally open.
DVR-530 User's Manual
SENSOR SETUP
SENSOR RECORD TIME
ALARM OUT TIME
MOTION SENSITIVE SETUP
CHANNEL-1 TYPE:MOTION + N-C
CHANNEL-2 TYPE:MOTION + N-O
CHANNEL-3 TYPE:NORMAL
CLOSE
CHANNEL-4 TYPE:NOT
INSTALLED
), THEN ( )
PRESS (
PRESS( ) TO EXIT
28
15
20
to set higher or