Pre-Lnstallation Checklist - GE Built-In Wall Oven Installation Instructions Manual

Installation Instructions
Pre-lnstallation Checklist
ALL INSTALLATION INFORMATION
ON THE FOLLOWING PAGES IS TO
BE USED FOR SINGLEAND DOUBLE
OVEN INSTALLATION!
i
Door removal is not a requirement for
installation of the product, but is an
added convenience. To remove the door:
Open the oven door as far as it will go.
Remove packaging materials.
Check behind hinges and under
false bottom. Remove labels on the
outside of the door, plastic on trims
and panel, all tape around the oven,
and any shipping screws securing
the oven to the base pad.
F o_
Oven Racks
_ iterature
Pack
Open oven door and remove literature
pack and oven racks.
Remove Installation Instructions from
literature pack and read them carefully
before you begin.
Be sure to place all literature, Owner's
Manual, Installations, etc. in a safe place
for future reference.
Push both hinge
Hinge
_._L. Unlocked
locks down toward _l_'.!_b. Position
the door frame, Hinge" ' :':':_
to the unlocked s_ot __.d
position. This may
require a flat blade
Hinge
screwdriver.
Arm
DO NOT LIFT THE DOOR
BY THE HANDLE!
Place hands on both sides of "T_-_
the door, and close the oven II_ji_:_
door to the removal position, I_/
which is most of the way closed. I_//
[_ ift door up and
out until the
hinge arms
clear the slots.
Hinge Clears Slot
NOTE: The oven door is very heavy. Be sure
you have a firm grip before lifting the oven
door off the hinges. Use caution once the
door is removed. Do not lay the door on its
handle. This could cause dents or scratches.
Place the oven on a table or platform
even with the cutout opening. (Platform
must support 150 Ibs. [68 Kg] single,
275 Ibs. [124 Kg] double.)
Remove the bottom trim from the top
of the oven. It will be installed at the end
of the installation process. The trim is
wrapped separately and taped to
the top of the unit.
3