Return appliance to your nearest authorized KRUPS Service Center for examination, repair or adjustment (see Limited Warranty). The use of accessory attachments not recommended by KRUPS may result in fire, electric shock or injury to persons.
CAUTION: • This appliance is for household use only. Any servicing other than routine cleaning and user maintenance should be performed by an authorized KRUPS Service representative. • Do not immerse base in water. • To reduce the risk of fire or electric shock, do not remove the base of the machine. Repairs should be performed by authorized service personnel only.
Page 5
KRUPS XP1020-0828035.qxd:-0828035 18/04/08 14:58 Page 5 English DESCRIPTION: a. ON/OFF Pilot light d. Measuring spoon b. Selector knob e. Carafe Off position f. Removable drip tray grid Espresso-coffee making position g. Cappuccino accessory Hot steam position h. Steam nozzle c.
KRUPS XP1020-0828035.qxd:-0828035 18/04/08 14:58 Page 6 English BEFORE FIRST USE Important! • Before using for the first time, or after not having used for a considerable time, rinse the appliance as indicated below. Check that the appliance is unplugged.
Page 7
KRUPS XP1020-0828035.qxd:-0828035 18/04/08 14:58 Page 7 English Insert the filter holder in the appliance. Turn it firmly from left to right to put it into “locked” position. Place the carafe or a cup under the filter holder. Plug in the appliance.
KRUPS XP1020-0828035.qxd:-0828035 18/04/08 14:58 Page 8 English MAKING ESPRESSO Check that the appliance is unplugged and that there is no pressure. (See CAUTION-PRESSURE) Unscrew the boiler cap. Measure out the right amount of water for your needs and pour it into the water tank. For instance: an espresso-sized cup (small cup for strong coffee) = 1 to 2 oz (25 to 50 ml).
Page 9
KRUPS XP1020-0828035.qxd:-0828035 18/04/08 14:59 Page 9 English ATTENTION! Do not over fill or pack coffee too tightly. Fit the filter-holder into the appliance turning it from left to right and locking it firmly into place. Place a cup or the carafe under the filter-holder.
KRUPS XP1020-0828035.qxd:-0828035 18/04/08 14:59 Page 10 English MAKING CAPPUCCINOS Follow the instructions for “Making Espresso” but add 2 oz (50 ml) of water to the volumes indicated. An authentic cappuccino is made using 1/3 espresso, 1/3 hot steamed milk and 1/3 frothed milk.
KRUPS XP1020-0828035.qxd:-0828035 18/04/08 14:59 Page 11 English MAKING CAFFE LATTES Follow the instructions for “Making Cappuccinos” with the following proportions: 2/3 frothy milk, 1/3 espresso, and if desired you may spoon some milk foam on top. STEAMING WITHOUT MAKING ESPRESSO Steam is used to froth milk and also to reheat water (tea, hot drinks).
1. Remove all lime and coffee residues from the brewing sieve and the brewing head. 2. Remove the plastic housing of the cappuccino nozzle (g). As a descaling agent we recommend the use of Krups descaling solution N°F054 available at authorized Krups retailers and Service Centres or by contacting your respective countries Customer Service...
Page 13 English 3. Dissolve a packet of KRUPS descaling solution in 10 oz/300 ml of lukewarm water and pour into the boiler container and screw back the cap. Put a container under the brewing head and another under the steam nozzle.
English LIMITED WARRANTY This KRUPS product is warranted for 1 year from the date of purchase against defects in material and workmanship. During this period, the KRUPS product that, upon inspection by KRUPS, is proved defective, will be repaired or replaced, at KRUPS’ option, without charge to the customer.
Need help?
Do you have a question about the XP 1020 and is the answer not in the manual?
Questions and answers