Download Print this page

Dell D610 - Latitude Centrino Laptop 1.6ghz 512mb 40gb Wifi Xp Pro 14" Lcd Specifications Page 92

User guide.
Hide thumbs

Advertisement

persists, try another drive. Run the Hard-Disk Drive tests as described in
 
Hard-disk drive read failure —
The hard drive may be defective. Shut down the computer, remove the
from a CD. Then shut down the computer, reinstall the hard drive, and restart the computer. If the problem persists, try another drive. Run
the Hard-Disk Drive tests as described in
 
Insert bootable media —
The operating system is trying to boot to a nonbootable CD. Insert a bootable CD.
 
Invalid configuration information-please run System Setup Program —
hardware configuration. The message is most likely to occur after a memory module is installed. Correct the appropriate options in the
system setup
program.
 
Keyboard clock line failure —
For external keyboards, check the cable connection. Run the Keyboard Controller test as described in
the Dell
Diagnostics."
 
Keyboard controller failure —
For external keyboards, check the cable connection. Restart the computer, and avoid touching the keyboard
or the mouse during the boot routine. Run the Keyboard Controller test as described in
 
Keyboard data line failure —
For external keyboards, check the cable connection. Run the Keyboard Controller test as described in
the Dell
Diagnostics."
 
Keyboard stuck key failure —
For external keyboards or keypads, check the cable connection. Restart the computer, and avoid touching the
keyboard or keys during the boot routine. Run the Stuck Key test as described in
 
Memory address line failure at address, read value expecting value —
memory modules
and, if necessary, replace them.
 
Memory allocation error —
The software you are attempting to run is conflicting with the operating system, another program, or a utility.
Shut down the computer, wait 30 seconds, and then restart it. Try to run the program again. If the error message still appears, see the
software documentation.
 
Memory data line failure at address, read value expecting value —
memory modules
and, if necessary, replace them.
 
Memory double word logic failure at address, read value expecting value —
Reinstall the
memory modules
and, if necessary, replace them.
 
Memory odd/even logic failure at address, read value expecting value —
the
memory modules
and, if necessary, replace them.
 
Memory write/read failure at address, read value expecting value —
memory modules
and, if necessary, replace them.
 
No boot device available —
The computer cannot find the hard drive. If the hard drive is your boot device, ensure that the drive is installed,
properly seated, and partitioned as a boot device.
 
No boot sector on hard drive —
The operating system may be corrupted.
 
No timer tick interrupt —
A chip on the system board may be malfunctioning. Run the System Set tests as described in
Diagnostics."
 
Operating system not found —
Reinstall the
 
Optional ROM bad checksum —
The optional ROM apparently failed.
 
A required .DLL file was not found —
program.
1.  Click the Start button and click Control Panel.
2.  Click Add or Remove Programs.
3.  Select the program you want to remove.
"Using the Dell
Diagnostics."
A memory module may be faulty or improperly seated. Reinstall the
A memory module may be faulty or improperly seated. Reinstall the
hard
drive. If the problem persists, contact Dell.
Contact
The program that you are trying to open is missing an essential file. Remove and then reinstall the
"Using the Dell
Diagnostics."
hard
The system configuration information does not match the
"Using the Dell
Diagnostics."
"Using the Dell
Diagnostics."
A memory module may be faulty or improperly seated. Reinstall the
A memory module may be faulty or improperly seated.
A memory module may be faulty or improperly seated. Reinstall
Contact
Dell.
Dell.
drive, and boot the computer
"Using
"Using
"Using the Dell

Advertisement

   Related Manuals for Dell D610 - Latitude Centrino Laptop 1.6ghz 512mb 40gb Wifi Xp Pro 14" Lcd

Comments to this Manuals

Symbols: 0
Latest comments: