Table of Contents
Advertisement
Operation
Using the dryer
1. Open the door.
2. Check lint filter.
The filter should be cleaned
after and before every drying
process.
Cleaning the filter
reduces the drying time and
saves energy.
F
3. Rotate program
selector to the
desired program.
Select the program
which
corresponds
to the laundry in
the dryer from the program
selection
table (see page 26).
The dryer light turns on inside
the drum.
The "Start!Stop"
indicator light
starts flashing.
[-_
The estimated
remaining time
will be indicated.
[-_
Lint filter indicator flashes for
5 seconds
- "Check lint filter"!
4. If required,
select "Low heat"
by pressing the button.
The "Options"
are explained
on
page 16.
5. If required,
select "Easy ironing"
by pressing the button.
The "Options"
are explained
on
page 16.
%
The estimated
remaining time
will be updated.
6. Place laundry in the empty
drum. Put each piece of laundry
into the machine separately.
For best results the laundry to
be dried must be sorted
according
to type of laundry
and desired degree of drying.
For further information
see
page 16.
[-_
Observe drying symbols of the
laundry manufacturer.
Ensure that there is only laundry in
the drum. Check that all items are
completely
in the drum.
7. Close the door.
[-_lf
the door has not been closed
properly, the dryer will not start.
8. Press the "Start!Stop"
button.
The "Start!Stop"
indicator
light
illuminates.
If an automatic
program
has been
selected, the indicator
lights
indicate the progress
of the
program
sequence.
[-_At
the end of the program
sequence
Damp dry is emitted
(if set).
At program
end the LED
"Wrinkle blocWEnd"
illuminates.
When the drying process
is
complete
(program
or selected
time program
ended), the drum
rotates at specific intervals.
This prevent the laundry from
creasing (see "Easy ironing",
page 16).
9. Open the door.
10. Take the laundry out of the
dryer.
11. Rotate the program
selector
to "Off".
The dryer light goes out.
12. Clean the filter.
The filter should be cleaned
after each drying process.
Cleaning the filter reduces the
drying time and saves energy.
13. Close the door.
18
Hide quick links:
Advertisement
Table of Contents
