Cleaning And Care; Cleaning The Dryer; Cleaning The Lint Filter - Bosch WTC82100US/02 Operating & Installation Instructions Manual

Cleaning and
Care
Cleaning the dryer
RISK OF EXPLOSION!
Never use solvents or highly
flammable liquids for cleaning.
Incorrect cleaning may damage
the dryer. Do not spray with
a water jet. Do not use scouring
agents or all-purpose cleaners.
Do not use steam cleaners.
Wipe the housing and fascia with
a soft cloth and soapy water only.
Wipe the drum, door seal and inside
of the door with a damp cloth only.
Cleaning the lint filter
A dirty filter extends the drying time
and increases energy consumption.
The filter should be cleaned before
and after each drying process,
however at the latest when the
Filter indicator light flashes.
If the Filter indicator light flashes
during a drying program, clean the
filter immediately and check the
condensate hose.
[-i--] The program interrupts
automatically.
1. Switch off the dryer.
Program selector to Off.
The inside of the door heats up
during the drying process.
2. Open the door.
3. Pull out filter...
4. Remove fluff (run hand over
filter).
The filter should be rinsed once
a year under warm running water.
The filter must be dried thoroughly
before being replaced.
5. Re-insert filter until it locks
audibly into position.
6. Close the door.
17