Kenmore 580.75119 Owner's Manual page 9

PROCEDURE B
W Remove the backing from the support blocks
and attach them to the inside of the wall sleeve
as shown FIG 14. Slide the baffle into slots of
the support blocks.
Wall
Sleeve
D Install the new unit into the wall sleeve.
I_1 Assemble trim as described in Step 6,
Procedure A.
Block
FIG. 14
. Air conditioners coveredin this manualposean
excessiveweighthazard.Twoor morepeopleare
neededto moveand installthe unit.
To preventinjuryor strain,use properliftingand
carryingtechniques whenmovingunit.
. Whenhandlingthe air conditioner, b e carefulto avoid
cutsfromsharpmetalfins on front and rearcoils.
• Makesureair conditioner doesnotfall during
removal.
. If unitdoesnotoperateafter installation check,to be
surethecircuitinterrupter has notbeentripped.Refer
to theTroubleshooting guidefor resetprocedure.
-9-