Configuring The Ups Network Module Settings; Installing The Erm - HP R7000 INTL User Manual

Click Sign In. The HP UPS Network Module web interface appears.
5.

Configuring the UPS Network Module settings

Use the Settings screens of the HP UPS Network Module web interface to configure the UPS Network Module.
For more information, see the HP UPS Network Module User Guide on the HP website
(http://www.hp.com/support/HPNM_Manuals).

Installing the ERM

Before installing the ERM, review and observe all warnings in "Precautions (on page 11)."
WARNING:
equipment in the rack might cause the rack to become unstable. Install the heavier components
first, and then continue to populate the rack from the bottom to the top.
Install the mounting rails
1.
With one person on each side of the carton, lift the chassis and lower it to the floor in front of the rack.
2.
A risk of personal injury or damage to the equipment exists. Uneven loading of
("Installing the mounting rails" on page 12).
Installation and configuration 28