Macintosh; Install The Software (Macintosh) - Canon CanoScan 9900F Quick Start Manual

Install the Software (Macintosh)

When you use a IEEE1394 (FireWire) interface cable, please read
the IEEE1394 caution sheet.
1
Turn the computer on.
If the "...Would you like to look for the software
on the Internet?" appears, click [Cancel].
2
Place the CanoScan Setup Utility CD-ROM in the drive.
The CanoScan Setup Utility main menu will display.
If no window displays, double-click the CD-ROM
icon, then the Setup icon.
3
Click [Install the Software].
Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if
you accept the terms.
The [Install] window will display.
4
Click [Start Installation].
You will install six software programs and the Scanning Guide
(HTML format manual).
5
The installation procedure will start.
Follow the on-screen message prompts and click [Yes], [Next]
or [Install] to continue the installation.
6
When the installation is complete, click [Yes].
The computer will restart.
7
After restarting, remove the CD-ROM from the drive
and store it in a safe place.
4