2.4
Installation Requirements
2.4.1 Accessories
The GDU 37X Connector Kit is provided with the GDU 37X unit and is required to install the unit
(Figure 2-2). The GDU 37X Nutplate (115-01054-00) is also supplied with the unit to reinforce the panel
cutout in thin panel installations.
The contents of the GDU 37X Connector Kit are listed in Table 2-5. One kit is required for each GDU
37X installed.
Table 2-5. Contents of GDU 37X Connector Kit (011-01921-00)**
Sub-Assy,bkshl w/Hdw,Jackscrew
Conn, Rcpt,D-Sub, Crimp Socket, C
Contact, Sckt, D-Sub, Crimp, Size 20
2.4.2 Additional Equipment
A 3/32" hex drive tool is required to secure the GDU 37X to the panel as described in Section 2.7 Unit
Installation.
Page 2-4
Revision A
Item
Figure 2-2. GDU 37X Mounting Accessories
Garmin P/N
011-01855-04
330-00625-50
336-00094-00
CONNECTOR KIT
GDU 37x UNIT
011-01747-( )
G3X Installation Manual – GDU 37X
Quantity
1
1
20
011-01921-00
190-01115-01