Find Out The State Of The Tv - Philips 22HFL30x7x/10 Installation Manual

2. Find out the state of the TV

It is important to know if a TV is in 'virgin mode' (out of the box) or installed before.
If you can see this screen below, you know that the TV is in 'virgin mode' and you can install the set. See chapter 4 of
this manual.
If you power on the set and then press the 'Home' button on the guest remote, you will see this screen appear, if the
TV already has been installed or the wizard was already skipped.
Professional Settings ON Professional Settings OFF
You can start the installation wizard again by reinstalling the TV as explained in chapter 3 of this manual.
Disable the Professional Settings
Access the setup menu press the 'RC5 SETUP' key, and then press the 'Home/Menu' button. (For the guest remote
control, press the following keys in sequence: 3,1,9,7,5,3, 'MUTE').
Go to, Professional Mode and select the OFF option and confirm with "OK". Go back with the arrow keys and select
Store settings. Do confirm with "OK". After restart the TV will have the PBS mode set to OFF.
Note: All settings can be done without disabling the Professional Mode, but all settings from 'Professional Settings' which were not saved will
discarded during the transition to Consumer Mode.
3