Features; Product Information - Panasonic CS-KE30NKU Technical & Service Manual

FEATURES

This air conditioner is an inverter type unit that automatically adjusts capability as appropriate. Details on these functions are provided below;
refer to these descriptions when using the air conditioner.
• Microprocessor Controlled Operation
The interior compartment of the remote controller contains
several features to facilitate automatic operation, easy
logically displayed for easy use.
• Simple One-touch Remote Controller
The remote controller has several features to facilitate
automatic operation.
• 24-Hour ON or OFF Timer
This timer can be set to automatically turn the unit on or off
at any time within a 24 hour period.
• 1-Hour OFF Timer
This timer can be set to automatically turn off the unit at
any time after one hour.
• Night Setback
This function saves energy by controlling operation to
provide a quieter operating sound than normal.
• Automatic and 3-step Fan Speed
Auto/High/Medium/Low
• Air Sweep Control
This function moves a flap up and down in the air outlet,
directing air in a sweeping motion around the room and
providing comfort in every corner.
• Auto. Flap Control
This automatically sets the flap to the optimum position
during heating, cooling, and drying operation.
CONTENTS
FEATURES................................................................................. 2

PRODUCT INFORMATION ........................................................ 2

SAFETY PRECAUTIONS........................................................... 2
INSTALLATION LOCATION........................................................ 3
ELECTRICAL REQUIREMENTS ............................................... 3
SAFETY INSTRUCTIONS.......................................................... 3
NAMES OF PARTS .................................................................... 4
USING THE REMOTE CONTROLLER ...................................... 8
OPERATION WITH THE REMOTE CONTROLLER................... 9
1. Automatic Operation ................................................... 9
2. Manual Operation........................................................ 9
3. Adjusting the Fan Speed ........................................... 10
4. Fan Only.................................................................... 10
5. Night Setback Mode.................................................. 10
6. QUIET Mode ............................................................. 10
7. HIGH POWER Mode................................................. 11
8. UNOCCUPIED Mode ................................................ 11
PRODUCT INFORMATION
If you have problems or questions concerning your Air
Conditioner, you will need the following information. Model
and serial numbers are on the nameplate on the bottom of
the cabinet.
Model No. __________________________________
Serial No. ___________________________________
Date of purchase _____________________________
Dealer's address _____________________________
Phone number _______________________________
2
• Automatic Switching between Cooling and Heating
This unit automatically switches between cooling operation
and heating operation according to the difference between
the room temperature and the temperature setting.
• Hot Start Heating System
Right from the start, the air is warm and comfortable. This
system prevents any cold blasts at the beginning while the
heat pump is warming up, or even defrosting.
• Automatic Restart Function for Power Failure
Even when power failure occurs, preset programmed
operation can be reactivated once power resumes.
• High Power Operation
If not in Auto Operation, the unit operates at maximum
output for 30 minutes, regardless of the desired
temperature.
The fan speed is 1 step above "High".
• Quiet Operation
The fan rotates slower than the fan speed setting to provide
a quieter operating sound.
• Unoccupied
This function prevents the room temperature from
decreasing too much (or increasing too much) when no
one is in the room, and operate automatically to save
energy.
Page
SPECIAL REMARKS ................................................................12
SETTING THE TIMER ..............................................................13
USING THE 1-HOUR OFF TIMER ...........................................14
TIPS FOR ENERGY SAVING ...................................................14
ADJUSTING THE AIRFLOW DIRECTION ...............................15
OPERATION WITHOUT THE REMOTE CONTROLLER..........15
CARE AND CLEANING ............................................................16
TROUBLESHOOTING (BEFORE CALLING FOR SERVICE) ..17
OPERATING RANGE................................................................17
WIRED REMOTE CONTROLLER ............................................17
SPECIFICATIONS.....................................................................18
SAFETY PRECAUTIONS
The following symbols used in this manual, alert you
to potentially dangerous conditions to users, service
personnel or the appliance:
CAUTION
This symbol refers to a hazard or unsafe
practice which can result in severe
personal injury or death.
This symbol refers to a hazard or unsafe
practice which can result in personal
injury or product or property damage.
Page