Installation - Frigidaire 242292001 Use & Care Manual

Required Tools
You will need the following tools:
Tools Necessary:
Phillips Head
or
#2 Square
Drive Head
Socket
Wrench Set
Components Provided:
Installation
Top Hinge Top Hinge
Cover Front Cover Rear
Screw _ _erew
Top Lower
Hinge
Screw Screw
This Use & Care Guide provides general
installation and operating instructions for
your model. We recommend using a service
or kitchen contracting professional to install
your refrigerator. Use the refrigerator only as
instructed in this Use & Care Guide. Before
starting the refrigerator, follow these important
first steps.
Do Not install the refrigerator where the
temperature will drop below 55°F (13°C) or
rise above 110°F (43°C). The compressor
will not be able to maintain proper
temperatures inside the refrigerator.
Do Not block the toe grille on the lower front
of your refrigerator. Sufficient air circulation
is essential for the proper operation of your
refrigerator.
Allow the following clearances for ease
of installation, proper air circulation, and
plumbing and electrical connections:
Sides & Top 3/8 inch (9.5 ram)
Back 1 inch (25.4 m_)
Location
tf your refrigerator is placed with the door
Choose a place that is near a grounded,
non=GFCt, electrical outlet. Do Not use an hinge side against a wall, you may have to
extension cord or an adapter plug. allow additional space so the door can be
If possible, place the refrigerator out of opened wider.
direct sunlight and away from the range,
dishwasher, or other heat sources. DOOr opening
The refrigerator must be installed on a floor Your refrigerator should be positioned to allow
that is level and strong enough to support easy access to a counter when removing
a fully loaded refrigerator, food. For best use of refrigerator drawers and
Consider water supply availability for freezer baskets, the refrigerator should be in a
models equipped with an automatic ice position where both can be fully opened.
maker.