Safety And Approvals Specifications - Epson WorkForce Pro WP-4530 User Manual

Wireless security
Frequency band
Communication mode
Ethernet standard
Note: Wireless LAN standard complies with either IEEE 802.11 b/g or IEEE 802.11 b/g/n, depending on
purchase location.
Parent topic:

Safety and Approvals Specifications

United States
Canada
This equipment contains the following wireless module:
• Manufacturer: Marvell Semiconductor Inc.
• Type: SP88W8786-MD0-2C2T00
This product conforms to Part 15 of FCC Rules and RSS-210 of the IC Rules. Epson cannot accept
responsibility for any failure to satisfy the protection requirements resulting from a non-recommended
modification of the product. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and
away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed
outdoors is subject to licensing.
Parent topic:
WPA-PSK (TKIP/AES) WPA2 compliant
WEP (64/128 bit)
2.4 GHz
Infrastructure mode
Ad hoc mode
100 BASE-TX/10BASE-T
Technical Specifications
Safety: UL60950-1
EMC: FCC part 15 Subpart B class B
Safety: CAN/CSA C22.2 No. 60950-1
EMC: CAN/CSA-CEI/IEC CISPR 22 Class B
Technical Specifications
277