Error After Cartridge Replacement; Printing Is Slow - Epson WorkForce Pro WP-4520 User Manual

Parent topic:

Error After Cartridge Replacement

If you see an error light or error message after you replace an ink cartridge, follow these steps:
1. Remove and reinsert the ink cartridge you replaced, making sure to push it all the way into its slot.
2. Complete the ink cartridge installation steps.
Parent topic:
Related topics
Replacing Ink Cartridges and Maintenance Boxes

Printing is Slow

If printing becomes slow, try these solutions:
• Make sure your system meets the requirements for your operating system. If you are printing a high-
resolution image, you may need more than the minimum requirements. If necessary, increase your
system's memory.
• If you are using Windows 7, close the Devices and Printers window before you print.
• Clear space on your hard drive or run a defragmentation utility to free up existing space.
• Close any programs you are not using when you print.
• If your product is connected to a USB hub, connect it directly to your computer instead.
• If printing becomes slower after printing continuously for a long time, the product may have
automatically slowed down to protect the print mechanism from overheating or becoming damaged.
Let the product rest with the power on for 30 minutes, then try printing again.
For the fastest printing, select the following settings in your product software:
• Make sure the paper type setting matches the type of paper you loaded.
• Turn on any high speed settings in your product software.
• Select a lower print quality setting.
• Windows: Click the Maintenance tab, select Speed & Progress or Extended Settings, and select
the following settings:
• High Speed Copies
• Always spool RAW datatype
• Page Rendering Mode
Solving Problems Printing from a Computer
Solving Problems Printing from a Computer
250