Selecting Wireless Network Settings From The Control Panel - Epson WorkForce Pro WP-4520 User Manual

• To scan a double-sided document in the ADF, press the
then press the
EPSON Scan software, select ADF - Double-sided as the Document Source (Office or Professional
Modes only).
• To copy a double-sided document in the ADF, press the
button. Select Paper and Copy Settings, then select one of the 2-Sided Copying settings.
• To fax a double-sided document in the ADF, press the
Select Send Settings > 2-Sided Faxing.
Parent topic:
Related references
Copying Options
Scan to USB Device Options
Fax Sending Options
Fax Send Options
Related tasks
Selecting Double-sided Printing Settings - Windows
Selecting Double-sided Printing Settings - Mac OS X 10.5/10.6/10.7
Selecting Double-sided Printing Settings - Mac OS X 10.4
Placing Originals in the Automatic Document Feeder
Scanning in Office Mode
Scanning in Professional Mode

Selecting Wireless Network Settings From the Control Panel

You can select or change wireless network settings using your product control panel (WorkForce Pro
WP-4533).
To install your product on a wireless network, follow the instructions on the Start Here sheet and install
the necessary software from the product CD. The installer program guides you through network setup.
Note: Breakdown or repair of this product may cause loss of fax and network data and settings. Epson is
not responsible for backing up or recovering data and settings during or after the warranty period. We
recommend that you make your own backup or print out your fax and network data and settings.
1. Press the
2. Select Wi-Fi/Network Settings and press the OK button.
Menu button. Select Scan Settings > 2-Sided Scanning. If you are using the
Product Basics
Setup button.
Scan button, select your scanning method,
Copy button, then press the
Fax button, then press the
22
Menu
Menu button.