Feb - Canon 580EXII Instruction Manual

~
FEB
,1iI1I"1 i;;;11 11'11;;;11 lllii! 1'11,;;11 U'iliiU111 II 1I1111111~1
You can take three flash shots while automatically changing the flash
output for each shot up to ±3 stops in 1/3-stop increments (1/2-stop
increments if the camera enables only 1/2-stop increments). This is
called FEB (Flash Exposure Bracketing).
Select
<~>.
Press the
<@>
button so that
<~>
is displayed.
The
<
~
>
icon and bracketing
amount will blink.
Set the flash exposure bracketing
amount.
• Turn the
<
@
>
dial to set the amount.
Press the <@> button.
FEB will be set.
III •
After the three shots are taken, FEB will be cancelled automatically.
For FEB, set the camera's drive mode to single shooting. Be sure the
flash is ready before shooting .
• You can also combine FEB with flash exposure compensation and FE
lock.
[II'iI
You can prevent the FEB from being cancelled automatically after the
three shots are taken. (C.Fn-03 ~ p.27)
[II'iI
The FEB shooting sequence can be changed. (C.Fn-04
~
p.27)
15