Fetco CBS-2131 User Manual
  1. Manuals
  2. Brands
  3. Fetco Manuals
  4. Coffee Maker
  5. CBS-2132 XTS-3L
  6. User manual

Fetco CBS-2131 User Manual

3 liter and 1 gallon airpot brewers
Hide thumbs Also See for CBS-2131:
Table of Contents

Advertisement

Quick Links

www.fetco.com
NOTICE TO INSTALLER: Please leave this book with the machine.
Contact Information ........................................................2
Description & Features ...................................................2
Specifications..................................................................2
Requirements .................................................................2
Weights Capacities and Measurements.........................3
Installation.......................................................................5
© 2012 Food Equipment Technologies Company
®

Table of Contents

FETCO®, LUXUS®, EXTRACTOR®, INTERMITTENT BREW, and Driven To Innovation™
are trademarks or trade names of Food Equipment Technologies Company.
User's Guide
Models:
CBS-2131
CBS-2132
3 liter and 1 gallon airpot brewers
Operating Instructions...................................................10
Hot water convenience tap ...........................................17
Adjustable spray pattern ...............................................17
Error Codes...................................................................17
Airpot use instructions and cleaning.............................18
Parts diagrams, bill of materials lists ............................22
Wiring diagrams............................................................33
P114
Version1 October 2012

Advertisement

Table of Contents
loading

Related Manuals for Fetco CBS-2131

Summary of Contents for Fetco CBS-2131

  • Page 1: Table Of Contents

    Parts diagrams, bill of materials lists ......22 Accessing batch and programming menu screens ..8 Wiring diagrams............33 FETCO®, LUXUS®, EXTRACTOR®, INTERMITTENT BREW, and Driven To Innovation™ are trademarks or trade names of Food Equipment Technologies Company. © 2012 Food Equipment Technologies Company...

  • Page 2: Contact Information

    200°F (93°C) inside water tank (at sea level) Full Batch 1gal. CBS-2132 & CBS-2131—1 gal. version 195°F (91°C) ± 5° at sprayhead Designs, materials, specifications, physical dimensions, firmware and software protocol for equipment or replacement parts are subject to change by FETCO without notice.

  • Page 3: Weights Capacities And Measurements

    14.0 gal/53 lit E213213 2 X 3.0 kW 200-240 Terminal Block 4.2 – 6.1 21.3—25.5 14.0 gal/53 lit Designs, materials, specifications, physical dimensions, firmware and software protocol for equipment or replacement parts are subject to review and change by FETCO without notice...
  • Page 4 Dimensions & Utility Connections—Rough-in drawings CBS-2131 3 liter Rough-in CBS-2131—Single station 3 liter airpot version CBS-2132 3 liter Rough-in CBS-2132—Twin station 3 liter airpot version NEMA PLUG CONFIGURATION NEMA 5-15P NEMA 5-20P CBS-2131 1 gallon Rough-in CBS-2131—Single station 1 gallon airpot version...

  • Page 5: Installation

    Here are the key points to consider before installation: Electrical: All FETCO brewers require an electrical ground wire. Installation without grounding is dangerous. Verify voltages, polarity, circuits, and circuit breaker access before attaching equipment. The electrical diagram is located in the Users Guide and online at www.fetco.com.
  • Page 6 The heating process will start automatically when the tank has filled. 3. Most CBS-2131 equipment is factory equipped with a 120 V cord and plug. Some CBS-2131 and all CBS- 2132 have a terminal block for connecting the incoming power wires. Consult local codes to determine if a cord and plug can be installed on factory supplied terminal block equipment, or if the unit must be hard wired.
  • Page 7 4. Pre-check will display: "DC voltage calibration for pumps is running…Please wait…Calibration is successfully done”. (15 seconds) 5. The water tank will begin filling. FETCO Home Screen #1 will read “FILLING”. 6. When the water level rises and is sensed by the probe at the top of the tank the heaters will activate 7.

  • Page 8: Accessing Batch And Programming Menu Screens

    Calibration is successfully done. FETCO home screen will display on completion Batch selection and brew operation menu screens Tap FETCO HOME SCREEN to enter batch selection screen. Tap left or right side batches Hold down batch selector pennant to begin brew.
  • Page 9 Operator Training Review the operating procedures with whoever will be using the brewer. Pay particular attention to the following areas: 1. Always pre-heat the dispensers before the first use of each day by filling them half way with hot water, and letting them stand for at least 5 minutes.

  • Page 10: Operating Instructions

    To brew a single 3 liter coffee batch, using default recipe NOTES FETCO CBS-2130 series equipment is factory calibrated and preloaded with recipes and is ready to brew. Place 13”X5” paper filter in brew basket -FETCO Product # F002 or any 13”X5”...
  • Page 11 Brewing-shown by touchscreen Brewer screens displayed for brewing NOTES CBS-2131 CBS-2132 “READY SCREEN” Note: there are three “BREW AT Tap screen to display TEMPERATURE DEFINITONS”. The “Brew menus at temperature default routine is shown below. Brew basket sensor Unit displays four enabled.

  • Page 12: Programming- Operator Access Programming

    Programming- operator access programming -The FETCO CBS-2130 brewers have four brew batch menus per side. They are preprogrammed with basic settings that will operate the equipment as purchased. There are two batches each marked “Regular” and two marked “Decaf” -Most operators prefer a full batch and half batch setting for regular and decaf or specialty coffees. These will need to be programmed by the operator -Settings are adjustable and the names can be changed.
  • Page 13 (See Batch 2-Left) Batch 4 Right ** Batch Copy Copy From Batch L1-L4;R1-R4 Copy To Batch L1-L4;R1-R4 L1 L2? Copy? |_______________ (example) Batch 1&4 cannot be disabled. (CBS-2132); Batch 1 cannot be disabled. (CBS-2131) Batch can be disabled, and removed from display...
  • Page 14 Programming Factory set Programming Range GENERAL Notes Items Default (display) 200 °F Correction for high Tank Temp. 200°F |______________[]___| altitude below “OFF” allows AUTO Brew at Temp. AUTO SEE NOTE BELOW! |____________[]___| brewing at any ON AUTO temperature. °F • Temperature °F Units of Meas.
  • Page 15 Programming Factory set Programming Range OTHER Notes Items Default (display) Error Codes • Display Errors (Codes) Chart is below Reset !!Errors must be • Reset Errors (Reset) |_______________[]____| corrected and cleared!! Setup upload Brewer Copy ------------------------------------------------------------------------ • From SD to B. Brewer ---- |________________[]____...
  • Page 16 Programming Factory set Programming Range OUTPUTS Notes Items Default (display) TEST Runs pump to verify Left Pump • Left Pump Test (Press to test) Press To Test flow. Have container under brewbasket! 0.49 Calibrate Factory or service use • L. Pump Calib ’’...

  • Page 17: Hot Water Convenience Tap

    Brewbasket must Insert brewbasket be in place INSERT Error codes must be BREW cleared! BASKET Designs, materials, specifications, physical dimensions, firmware and software protocol for equipment or replacement parts are subject to review and change by FETCO without notice...

  • Page 18: Airpot Use Instructions And Cleaning

    D063 (1 gallon) Airpot ® DESCRIPTION : Dispenser Diagram The FETCO D041 (3 liter) and D063 (1 gallon) airpots are lever type, air pressure evacuated beverage dispenser featuring double-wall, vacuum insulated construction. The hermetically sealed vacuum double-wall construction provides excellent heat or cold retention, while the stainless steel outer and inner liners provide robust durability.
  • Page 19 Buttons to release the lid. dispenser Locator (if airpot : featured). Swing the lid completely 3 liters (FETCO D041) Align the center of the backwards -or- airpot Drip-Through with 1gallon (FETCO D063) the outlet of the brewbasket.
  • Page 20 Dispenser Cleaning & Maintenance D041 (3 liter) and D063 (1 gallon) Airpot ® To Clean : Squeeze the Lid Release Carefully remove the Remove the Drip-Through Buttons to release the lid. bellows Cap. Detach the Down-Tube Press the Lid Detach Button Handling the parts gently, and the Spout-Tube.
  • Page 21 NEW September, 2012 Please see our website-www.fetco.com for the most up to date listings and additional parts and service information Designs, materials, specifications, physical dimensions, firmware and software protocol for equipment or replacement parts are subject to change without notice.

  • Page 22: Parts Diagrams, Bill Of Materials Lists

    Parts diagrams, bill of materials lists...
  • Page 23 WASHER, M4 18-8 INTERNAL TOOTH LOCKWASHER 1082.00010.00 SCREW, M4x10 ZINC PLATED PAN PHILLIPS MACHINE 1102.00164.00 ADAPTER ASSY, 3/4" BSP X 1/4 SAE FLARE 1104.00043.00 TANK ASSY, 2300W/120VAC, CBS-2131, GROMMETS 1112.00163.00 WELDMENT TANK LOCK BRACKET, CBS-2100 1083.00011.00 WASHER, #8 SCREW SIZE, INTERNAL TOOTH LOCK 1082.00023.00 SCREW, #8-32 X 3/8 TRUSS HD PHIL., MACHINE...
  • Page 25 WASHER, M4 18-8 INTERNAL TOOTH LOCKWASHER 1082.00010.00 SCREW, M4x10 ZINC PLATED PAN PHILLIPS MACHINE 1102.00164.00 ADAPTER ASSY, 3/4" BSP X 1/4 SAE FLARE 1104.00043.00 TANK ASSY, 2300W/120VAC, CBS-2131, GROMMETS 1112.00163.00 WELDMENT TANK LOCK BRACKET, CBS-2100 1083.00011.00 WASHER, #8 SCREW SIZE, INTERNAL TOOTH LOCK 1082.00023.00 SCREW, #8-32 X 3/8 TRUSS HD PHIL., MACHINE...
  • Page 26 Drawing 1104.00043.00 TANK ASSY, 2300W/120VAC, CBS-2131, GROMMETS Ref# PART NO DESCRIPTION 1114.00066.00 WELDMENT TANK CBS-2131, GROMMET DESIGN 1024.00050.00 GROMMET, SILICONE, 11.4mm ID 1024.00051.00 GROMMET, SILICONE, BLANK 1024.00053.00 GROMMET, SILICONE, LL & TEMP. PROBES 1003.00005.00 BRACKET, ONE SHOT THERMOSTAT 1053.00003.00 THERMOSTAT, SINGLE SHOT, 240V/40A 1083.00009.00...
  • Page 28 Drawing 1101.00132.00 CBS-2132-3 Liter NO BYPASS 2 X 3kW/240VAC Ref# PART NO DESCRIPTION 1111.00029.00 WELDMENT BODY, CBS-2132 1024.00049.00 EDGE PROTECTOR, 7.00"LG, CBS-2130 1086.00004.00 BUSHING, SNAP, 1" MOUNTING HOLE 1024.00017.00 O'RING, 3.739" ID X 0.070" CS, 70 DURO, BUNA 1102.00183.00 SPRAY HOUSING ASSEMBLY, CBS-2130 1083.00010.00 WASHER, #8 SCREW SIZE W/NEOPRENE- BONDED SEAL 1084.00006.00...
  • Page 30 1101.00131.00 CBS-2132, 2 X 3kW/240VAC, 1gal BYPASS Ref# 1111.00029.00 WELDMENT BODY, CBS-2132 1024.00049.00 EDGE PROTECTOR, 7.00"LG, CBS-2130 1086.00004.00 BUSHING, SNAP, 1" MOUNTING HOLE 1024.00017.00 O'RING, 3.739" ID X 0.070" CS, 70 DURO, BUNA 1102.00183.00 SPRAY HOUSING ASSEMBLY, CBS-2130 1083.00010.00 WASHER, #10 SCREW W/NEOPRENE-BONDED SEAL 1084.00006.00 NUT, 8-32 18-8 HEX MACHINE SCREW 1102.00113.00...
  • Page 31 TANK ASSY, 2 X 3000W/240VAC, CBS-2132, GROMMETS REF# PART NO DESCRIPTION 1114.00062.00 WELDMENT TANK CBS-2132e, GROMMET DESIGN 1024.00053.00 GROMMET, SILICONE, LL & TEMP. PROBES 1024.00050.00 GROMMET, SILICONE, 11.4mm ID 1024.00051.00 GROMMET, SILICONE, BLANK 1107.00018.00 HEATER ASSEMBLY, IMMERSION 3000W/240VAC 1003.00005.00 BRACKET, ONE SHOT THERMOSTAT 1053.00003.00 THERMOSTAT, SINGLE SHOT, 240V/40A 1083.00009.00...
  • Page 32 1102.00183.00 PCSD Pump Spray Housing Assembly Parts Ref. PART NO DESCRIPTION SPRAY HOUSING ASSY& 1102.00020.00 MAGNETS, CSD DESIGN 1024.00045.00 O-RING, 5/8 X 13/16, 3/32 1023.00164.00 SPRAY HOUSING ADAPTER SCREW, M3.9x13, CHEESE PH., 1082.00068.00 T/FORM 1102.00019.00 CASCADE SPRAY DOME ASSEMBLY Complete CBS-2130 Spray Housing Assembly -Part number 1102.00183.00 CBS-2100 Series Brew Basket Assembly, 13”...

This manual is also suitable for:

Cbs-2132

Table of Contents