Advanced Sonar Settings - Garmin 400/500 Owner's Manual

data bars—show or hide battery voltage, water temperature, water
speed (if your transducer is capable), cruising, and navigation.
NOTE: To display water temperature or water speed, the connected
transducer must be capable of measuring water temperature, water
speed, or both. Select auto to display the values.
appearance—customize the display of fish symbols, whiteline, and
the sonar color scheme.
• fish Symbols—set how the sonar interprets suspended targets.
The unit does not interpret the sonar return data (default).
Suspended targets appear as symbols. Background sonar
information appears, making the distinction between fish
and structure easier.
Suspended targets appear as symbols with background
information shown. The target depth of each symbol is also
displayed.
Suspended targets appear as symbols. No background
information appears.
Suspended targets appear as symbols with no background
information shown. The target depth of each symbol is
displayed.
GPSMAP 400/500 Series Owner's Manual
• whiteline—highlights the strongest signal from the bottom to
help identify its hardness or softness.
◦ Off (default)—turns off whiteline.
◦ High—the most sensitive setting. Almost all strong returns
are highlighted in white.
◦ Medium—many strong returns are highlighted in white.
◦ Low—the least sensitive setting. Only the strongest returns
are highlighted in white.
Color Scheme—select white
on all sonar screens, but does not change the Temp Log screen.

Advanced Sonar Settings

To adjust advanced sonar settings, press
sonar screen.
Pause Sonar—stops the scrolling of the sonar screen.
To mark a waypoint at a selected depth:
1. While viewing a sonar screen, press
2. Use the Rocker to position the pointer over the fish or structure
you want to mark.
3. Press SELECT.
From the paused screen, press
continue scrolling.
Using Sonar
or blue. This affects the background
MENU
while viewing a
MENU > Pause Sonar.
MENU > Resume Sonar to
53