To Calibrate The Pressure Sensor; City Code Table - Casio 3047 Operation Manual

Hide thumbs

Advertisement

To calibrate the pressure sensor

1. Enter the Barometer/Thermometer Mode.
2. Hold down E until
display area.
3. Release E. After about three or four seconds,
either
(if one is set) will appear in the lower part of
the display. This is the setting screen.
4. Wait four or five seconds until either
barometric pressure calibration value (if there
is one set) appears in the center part of the
display.
5. After waiting four or five seconds, press D to
move the flashing to the pressure sensor
calibration setting.
• At this time,
value should be flashing on the display.
6. Press C (+) or A (–) to change the displayed barometric pressure by 1
hPa (0.05 inHg).
• Pressing C and A at the same time returns to the factory calibration
(
OFF
).
7. Press E to exit the setting screen.
To specify barometric pressure and temperature units
1. Enter the Timekeeping Mode.
2. Hold down E until the city code starts to
flash, which indicates the setting screen.
3. Use D to select either the temperature unit or
barometric pressure unit setting.
• See step 2 under "To set the time and date
manually" for information about how to scroll
through setting screens.
4. When the setting you want to change is flashing, press C to toggle
between the available settings.
• Temperature Units: Fahrenheit (
• Barometric Pressure Units: inchesHg (inHg) or Hectopascals (hPa)
5. After the settings are the way you want, press E to exit the setting screen.
To reset the reference depth to 0 meters (feet) manually
In the Depth Gauge Mode, press C and D at
the same time.
Important!
• This resets the reference depth and causes the
displayed depth to change to 0 meters (feet).
• Never perform the above operation while
submerged.
To specify the depth unit
1. Enter the Timekeeping Mode.
2. Hold down E until the city code starts to
flash, which indicates the setting screen.
3. Press D 11 times to select the depth unit
setting.
• See step 2 under "To set the time and date
manually" for information about how to scroll
through setting screens.
4. Press C to toggle between meters (m) and
feet (ft).
5. After the setting is the way you want, press E
to exit the setting screen.
Operation Guide 3047
appears in the upper
SET
OFF
or a temperature calibration value
OFF
or the barometric pressure
OFF
°
°
F) or Celsius (
C)

City Code Table

City
City
Code
–11
HNL
Honolulu
ANC
Anchorage
LAX
Los Angeles
DEN
Denver
CHI
Chicago
or a
NYC
New York
CCS
Caracas
RIO
Rio De Janeiro
–02
–01
GMT
LON
London
PAR
Paris
BER
Berlin
ATH
Athens
CAI
Cairo
JRS
Jerusalem
JED
Jeddah
THR
Tehran
DXB
Dubai
KBL
Kabul
KHI
Karachi
DEL
Delhi
DAC
Dhaka
RGN
Yangon
BKK
Bangkok
HKG
Hong Kong
SEL
Seoul
Tokyo
TYO
ADL
Adelaide
Sydney
SYD
NOU
Noumea
WLG
Wellington
• Based on data as of December 2005.
GMT
Other major cities in same time zone
Differential
–11.0
Pago Pago
–10.0
Papeete
–09.0
Nome
San Francisco, Las Vegas, Vancouver,
–08.0
Seattle/Tacoma, Dawson City, Tijuana
–07.0
El Paso, Edmonton, Culiacan
Houston, Dallas/Fort Worth,
–06.0
New Orleans, Mexico City, Winnipeg
Montreal, Detroit, Miami, Boston,
–05.0
Panama City, Havana, Lima, Bogota
–04.0
La Paz, Santiago, Port Of Spain
–03.0
Sao Paulo, Buenos Aires, Brasilia, Montevideo
–02.0
–01.0
Praia
Dublin, Lisbon, Casablanca, Dakar, Abidjan
+00.0
Milan, Rome, Madrid, Amsterdam, Algiers, Hamburg,
+01.0
Frankfurt, Vienna, Stockholm
Helsinki, Istanbul, Beirut, Damascus,
+02.0
Cape Town
+03.0
Kuwait, Riyadh, Aden, Addis Ababa, Nairobi, Moscow
+03.5
Shiraz
+04.0
Abu Dhabi, Muscat
+04.5
+05.0
Male
+05.5
Mumbai, Kolkata
+06.0
Colombo
+06.5
+07.0
Jakarta, Phnom Penh, Hanoi, Vientiane
Singapore, Kuala Lumpur, Beijing, Taipei, Manila,
+08.0
Perth, Ulaanbaatar
Pyongyang
+09.0
+09.5
Darwin
+10.0
Melbourne, Guam, Rabaul
+11.0
Port Vila
+12.0
Christchurch, Nadi, Nauru Island
13

Advertisement

loading