Proper Receiving - Wintal DVBT702HD User Manual

Note:
1)SOUND-SYS description: I refers to 6.0 M, DK 6.5 M and BG 5.5 M. Please set
the system to the local SOUND-SYS.
2)COLOR-SYS description:
A. For your selection of I mode, the COLOR-SYS refers to PAL-I;
B. For DK , the system refers to PAL-DK or SECAM-DK;
C. For BG , it refers to PAL-BG or SECAM-BG;
D. For L , it refers to SECAM-L.
3)For images without audio or with noise, check whether the audio system is set properly.
COLOR-SYS: Press the VOL-/VOL+ button to switch among PAL, NTSC and SECAM in
turn.
Note:
If the signal intensity is very poor or too weak, ill images would still occur with strong noise,
swing and bad audio effect no matter how you adjust the antenna. This is not the failure of
your TV. Try an open antenna or a cable TV if the telescopic antenna does not work.
9

.4 Proper Receiving

9.4.1 Access the setting entries of the Language in the System to choose your required
OSD language.
9.4.2 Access the setting entries of the AUTO-SEARCH and SEARCH and make sure
whether the systems are set according to the responding transmitting requirements. Refer to
Part 9.3 for specific instructions.
9.4.3 Access the setting entries of the SOUND-SYS and COLOR-SYS and start
searching channels according to specific instructions in Part 9.3.
9.4.4 To achieve the best effect for receiving channels, please adjust the direction and angle
of your antenna.
20