Preset - Wintal DVBT702HD User Manual

9.3 PRESET

POSITION: Allows you to select a certain channel
and activate SWAP, FINE, SEARCH, SOUND-SYS
and COLOR-SYS.
REMEMBER: Press VOL-/VOL+ to select OFF. Thus,
this channel does not display when you change
channels. If it is set to be ON, this channel would
display on changing channels.
AUTO-SEARCH: Press VOL-/VOL+ to start
AUTO-SEARCH function. After AUTO-SEARCH, the
system will save the channels automatically. After
selections of channels, the system will return to the channel number
Note:
Before you start the AUTO-SEARCH, please set the SOUND/COLOR as the corresponding
local systems. Or, the channel program may have no audio or have cacophony while the
image may have no colour.
SWAP: Press CH- or CH+ to select this entry. Press VOL+/VOL- to change it to your
required channel. To confirm, press CH- or CH+.
FINE: Use this entry to adjust the channel for perfect signal quality when the signal quality
is poor.
SEARCH: This entry is used to control the current channel. When you SEARCH a signal in
this way the receiving indication frequency will stop. This indicates that a perfect position
for you to save a channel. If the channel features a poor signal quality, the system will
identify it as no signal.
SOUND-SYS: Press VOL-/VOL+ to switch among I , DK and BG in turn.
POSITION
REMEMBER
AUTO-SEARCH
SWAP
FINE
SEARCH
SOUND-SYS
COLOR-SYS
19
PRESET
1
ON
1
0
551MHZ
DK
PAL
0 .