Dimensions for built-in area
Unit is top-heavy and may tip
forward when the doors are
. A solid soffit or 2" wood block is
required above the refrigerator
to prevent tipping during use.
If solid soffit is more than 1 inch
above refrigerator, a wood bloc1
must be installed on the wall no
more than i/4 inch above the
Failure to follow these instructions
could result in personal injury or
Width and depth of the built-in area
are determined by the type of
The built-in refrigerator
can be installed wilh the doors flush
with the wall, with the doors
protruding from the wall, or with side
panels enclosing refrigerator.
one method of installation
the dimensions givenfor
method as shown.
Height of built-in area can range from
a minimum of 82-l/2" to 84-3/4".
Optional top grilles may be required
for enclosures less than 83-98".
Height dimensions with optional top
grilles are given on page 4.
+/- l/8" tolerance
Dimensions for tipping product
can be cut anywhere