System; Contrast; Beeper; Nmea Output - Garmin Fishfinder 160 Owner's Manual

Unit Operation
Setup Menu/Alarms
Contrast Adjustment
Beeper Selections
24

System

The 'Sys'(System) tab contains the 'Contrast', 'Beeper', and 'NMEA'
Output setups. To access the 'System' Setup Menu, use the arrow keys to
highlight the System tab.

Contrast

The display 'Contrast' may need to be adjusted to compensate for light
levels or viewing angles.
To Adjust the Contrast:
1. Highlight the 'System' tab on the Setup Menu.
2. Highlight the 'Contrast' Adjustment fi eld and press ENTER.
3. Move the slider using the arrow keys, press ENTER to accept the setting.

Beeper

The 'Beeper' fi eld contains three settings: 'Off', 'Alarms Only', and 'Key
& Alarm'.
To Change the Beeper Setting:
1. Highlight the 'System' tab on the Setup Menu.
2. Highlight the 'Beeper' fi eld and press ENTER.
3. Choose 'Off', 'Alarms', or 'Key & Alarms', press ENTER to accept the setting.

NMEA Output

The Fishfi nder 160 has the ability to output information about Depth,
Speed, and Water Temp for display on another NMEA-compatible device.
To Activate/Deactivate the NMEA Output:
1. Highlight the 'System' tab on the Setup Menu.
2. Highlight the 'NMEA' Output fi eld and press ENTER.
3. Choose 'Off', or 'On', press ENTER to accept the setting.