Adjusting The Shock Absorber Assembly - Yamaha FZS1000N Owner's Manual

Hide thumbs Also See for FZS1000N:
Table of Contents

Advertisement

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Compression damping force adjusting screw
Compression damping force
To increase the compression damping
force and thereby harden the compres-
sion damping, turn the adjusting screw
on each fork leg in direction a. To de-
crease the compression damping force
and thereby soften the compression
damping, turn the adjusting screw on
each fork leg in direction b.
CI-02E
21 clicks in direction b*
Minimum (soft)
6 clicks in direction b*
Standard
1 click in direction b*
Maximum (hard)
* With the adjusting screw fully turned in direction a
CAUTION:
_
Never attempt to turn an adjusting
mechanism beyond the maximum
or minimum settings.
_
NOTE:
_
Although the total number of clicks of a
damping force adjusting mechanism
may not exactly match the above spec-
ifications due to small differences in
production, the actual number of clicks
always represents the entire adjusting
range. To obtain a precise adjustment,
it would be advisable to check the num-
ber of clicks of each damping force ad-
justing mechanism and to modify the
specifications as necessary.
_
3-13
EC000015
Adjusting the shock absorber
assembly
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring, a rebound damping force ad-
justing knob and a compression
damping force adjusting screw.
CAUTION:
_
Never attempt to turn an adjusting
mechanism beyond the maximum
or minimum settings.
_
EAU01699
EC000015

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fzs1000ncFz1 fzs1000nFz1 fzs1000nc

Table of Contents