Coolant - Yamaha YZFR1W(C) Owner's Manual

Hide thumbs Also See for YZFR1W(C):
Table of Contents

Advertisement

PERIODIC MAINTENANCE AND MINOR REPAIR
NOTE:
After the engine is started, the engine
oil level warning light should go off if the
oil level is sufficient.
CAUTION:
If the oil level warning light flickers
or remains on, immediately turn the
engine off and have a Yamaha dealer
check the vehicle.
11. Turn the engine off, and then
check the oil level and correct it if
necessary.
12. Install the cowling.
6

Coolant

The coolant level should be checked
before each ride. In addition, the cool-
ant must be changed at the intervals
specified in the periodic maintenance
ECA10400
and lubrication chart.
To check the coolant level
1. Place the vehicle on a level sur-
face and hold it in an upright posi-
tion.
NOTE:
G
The coolant level must be checked
on a cold engine since the level
varies with engine temperature.
G
Make sure that the vehicle is posi-
tioned straight up when checking
the coolant level. A slight tilt to the
side can result in a false reading.
2. Check the coolant level in the cool-
ant reservoir.
NOTE:
The coolant should be between the
minimum and maximum level marks.
6-16
EAU20070
EAU42990
1. Coolant reservoir
2. Maximum level mark
3. Minimum level mark
3. If the coolant is at or below the
minimum level mark, remove cowl-
ing B. (See page 6-9.)
4. Remove the reservoir cap, add
coolant to the maximum level
mark, and then install the reservoir
cap.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

R1 2008Yzfr1wYzfr1?R1 yzfr1wR1 yzfr1wc

Table of Contents