Handlebar Switches - Yamaha FZS10X Owner's Manual

LCD and tachometer brightness
control mode
1. Tachometer panel
2. Tachometer needle
3. LCD
4. Brightness level
This function allows you to adjust the
brightness of the LCD and the tachom-
eter panel and needle to suit the out-
side lighting conditions.
To set the brightness
1. Turn the key to "OFF".
2. Push and hold the "SELECT" but-
ton.
3. Turn the key to "ON", and then re-
lease the "SELECT" button after
five seconds.
INSTRUMENT AND CONTROL FUNCTIONS
4. Push the "RESET" button to select
the desired brightness level.
5. Push the "SELECT" button to con-
firm the selected brightness level.
The display will return to the odom-
eter or tripmeter mode.
3-8

Handlebar switches

Left
1. Dimmer switch " / "
2. Turn signal switch " / "
3. Horn switch " "
4. Hazard switch " "
Right
1. Engine stop switch " / "
2. Start switch " "
EAU12347
3