Wheelock Cooper ET-1010-R Manual

Series ET-1010 and ET80 Vandal Resistant Speakers and Speaker Strobes

Description

The Wheelock Series ET Vandal Resistant speakers and
speaker strobes provide a full range of rugged, high performance
combinations specifially designed to meet the critical needs of
the life safety industry for voice and tone signaling. Available in
compact, aesthetically pleasing package styles, each ET model
covers both 25 and 70 volt audio systems, and has multiple
wattage taps from / to 8 watts. Their high-efficiency design
1
8
provides improved voice clarity and higher sound output for typical
low frequency fire evacuation signal, such as the "slow whoop"
and "temporal code-3".
Series ET80 Speaker Strobes are designed to meet the latest
requirements of NFPA 72 (National Fire Alarm Code), ANSI
117.1 (American National Standard of Accessible and Usable
Buildings and Facilities) and UL Standard 1971 (Standard for
Signaling Devices for the Hearing Impaired) and UL Standard
1480 (Speakers for Fire Protective Signaling Systems).
Series ET80 Speaker Strobes are UL Listed for indoor use, wall
mount, under Standards 1971 and 1480 for Speaker Appliances,
and incorporate a Lexan ® lens to provide maximum reliability for
effective visible signaling. Strobe options include Multi-candela
MCW strobes with field selectable 15/30/75/110 or MCWH strobes
with field selectable 135/185 candela. Single candela 1575
strobes (rated 15cd with 75 cd on axis) are also available.
Series ET80 Speaker Strobes, when used with Wheelock SM/DSM
Sync Modules or Wheelock Power Supplies produce synchronized
strobe flashes for compliance with ADA guidelines concerning
photosensitive epilepsy.
S5391
151-92-E 7125-0785:152 (ET80)
7320-0785:105 (ET-1010)
ET80

Features

• Approvals Include: UL Standard 1480, UL Standard 1971,
California State Fire Marshal (CSFM), New York City (MEA),
Chicago (BFP), and FCC Part 15
• Complies with OSHA 29, Part 1910.165
• Designed to meet or exceed NFPA/ANSI Standards and ADA
Accessibility Guidelines
• High efficiency speakers designed for maximum output at
minimum wattage across 400 to 4000 Hz frequency range
• Field selectable taps for 25 or 70 VRMS operation from 1/8 watt
up to 8 watts in 3 dB steps
• ET80 Speaker Strobe models available with Multi-candela
strobes rated 15/30/75/110cd and 135/185cd or single candela
strobes rated 15cd (with 75cd on axis)
• All strobe inputs are compatible with standard reverse polarity
type supervision of circuit wiring by an alarm panel
• Attractive package styles for flush or surface mounting to
standard low cost backboxes
• ET-1010 models UL Listed for outdoor use with Wheelock WBB
outdoor backbox
• Vandal resistant die cast grilles
• Sealed back speaker construction for extra protection and
improved audibility
• Fast installation with IN/OUT screw terminals using #12 to #18
AWG wring
• Compliance with RFI limits in FCC Part 15, Class "B" for
compatibility with sensitive detection and communication
circuits
• Audio inputs include a 10 uF blocking capacitor for compatibility
with DC supervision of Speaker Notification Appliance Circuits
ET-1010
ET-1080