Models S,Su & Ss684 - Garland S680 Series Installation And Operation Manual

DIMENSIONS AND SPECIFICATIONS, MODELS S,SU & SS684
Model
S684*
SU684**
SU684RC2***
Salamander Broiler****
*(all purpose tubular elements) **(Sealed -top elements, North American Model # SS684) *** Maximum on any 684 series range .
****Add when wired to range base (SER/SUER-680)
Height
(1194mm)
Ratings :
Tubular Elements - Small 6-1/2" (165mm) - 1250 Watts . Large 8-1/2" (216mm) - 2100 Watts
Sealed High Performance Elements - Small 7" (180mm) - 2000 Watts . Large 8-5/8" (220mm) - 2600 Watts
Hot Top (per 12"/305mm section) - Front and Rear sections each 1675 Watts, (3350 Watts total)
Griddle (per 12"/305mm section) - 3350 Watts
Standard Oven - 4 .85 kW
Convection Oven - 5 .0 kW (plus 0 .5kW fan motor, for 5 .5kW total)
7-1/2"
REAR CABLE
[190mm]
ENTRANCE
34-1/4"
[870mm]
41"
[1041mm]
Page 4
Total Kw Load 208V/1Ph 208V/3 Ph
27
33
34
7
Exterior Dimensions
Width Depth
47" 60" 31-1/4"
(1524mm) (794mm)
60"
[1524mm]
127 76 110
157 97 136
N/A 100 142
34 23 29
Oven Interior Dimensions
Height Width
13-1/2" 26-1/4"
(343mm) (667mm)
3-1/2"
NOTE: For ranges with convection oven(s),
[829mm]
(models with suffix `RC' or `RC2'), air circulation
is required for proper operation of fan motors .
These models must not be dais mounted or
installed without legs .
24-1/2"
[622mm]
NOTE: Salamander can not be installed wired
from the range base on a S684 in 208/1/60 .
Salamander must have a separate circuit .
6"
NOTE:
[152mm]
responsibility of the Owner and the Installer to
comply with those codes .
9-1/4"
[235mm]
31-3/4"
[806mm]
6"
[152mm]
15-1/4"
[387mm]
240V/3 Ph 400 V/3N
66 —
84 60
87 60
20 4
Weight
Depth Lbs/Kg
22"
600/273
(559mm)
Installation
Side
Clearances:
Range w/o
3"
Salamander
(76mm)
Range w/ 7"
Salamander (178mm)
10"
Hot Sections
(254mm)
Many local codes exist, and it is the
REAR CABLE
ENTRANCE
29"
[737mm]
W/OPTIONAL
Part # P153 Rev 1 (02/21/08)
415V/3N
—
58
58
4
Back
2"
(51mm)
2"
(51mm)
—
3"
[76mm]
4-3/4"
[mm]
RC MOTOR