Download Table of Contents Print this page

Emergency Eject - Toshiba XM-6401B Instruction Manual

Hide thumbs Also See for XM-6401B:

Advertisement

Table of Contents

EMERGENCY EJECT

The following procedure is intended only as a last resort when
pressing the eject button fails to open the CD tray.
1. Turn CD-ROM drive power OFF.
2. Insert a solid bar (i.e. large paper clip*) into Emergency Eject hole
and push in as shown in the picture below.
3. CD tray will open/eject.
This procedure cannot be repeated without cycling the CD-ROM's
power. After the media is removed and the loading tray is closed,
the tray will not reopen without first turning the power ON/OFF.
* Use a bar that is less than 1.5 mm in diameter. Do not insert more
than 50mm in depth. Inserting more than 50mm may damage the
CD-ROM drive.
CAUTION!
Inserting Bar to Eject CD Tray
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Txm6401f1

Table of Contents